Flame resistant reflective tape orange-silver-orange GS-1303FR2O

1. Our FR reflective tape has various colors to choose,Fluorescent yellow, orange, sliver, yellow-silver-yellow, orange-silver-orange etc.

2. Our orange-silver-orange FR reflective tape has sharp clean edge between the fluorescent orange and silver part, and has good flame retardant and heat resistance performance to keep workers safe and enhance their nighttime visibility.

3. We keep stock for regular products and can send out immediately.

4. Large scale: over USD 300,000,000 annual sales; monthly production 1,500,000 m2.

R¹: Measured by Chinastars on new product at +5.0° entrance and 0.2° observation angles.

R²: ANSI/ISEA 107-2010 and EN ISO 20471 minimum coefficient of retroreflection for Level 2 retroreflective material.

³ Home wash according to ISO 6330 Method 2A at 60 °C and product maintain R ≥ 100 cd/lux/m3.

⁴ Industrial cleaning according to EN ISO 15797:2004 at 85°C and product maintain R ≥ 100 cd/lux/m3.

Our Orange-Silver-Orange Fire Coat Reflective tape has a reflective silver stripe centered with the fluorescent color surface layer, which is bonded to an FR treated cotton backing. It is designed for fire uniform, workwear to enhance the visibility of the wearer in low-light condition,ideal for electric or firefight workwear that require high flame retardant and heat resistance performance.

Most of our FR reflective tape contains aluminum layer, and sweat /oil/ water stains may occur if the surface of the product has direct contact with hands during application and is then exposed to hot and humid conditions. Even though these blemishes won’t affect performance of the product, we strongly recommend handling the reflective tape with gloves and keeping them in the environment of below 26.7 °C (80 °F) and lowering than 70% relative humidity.

Some suggestions for extending the life of reflective tape on safety clothing:

1. When do machine wash, you may use a mild detergent, but No Bleach or Fabric Softener!

2. Try to avoid wash the reflective products with your work jeans or any clothing with rough fabric or edges. The microscopic glass beads on the FR retro reflective tape can be worn off by rough texture.

3. Try to line dry your reflective products. If you choose to machine dry, try to remove the product immediately. The added heat can damage the FR reflective tape.